Tuesday, April 30, 2013

Choosing The Right Bedslide For Your Needs




BEDSLIDE now offers 5 models of BED SLIDE Cargo Trays.Which BEDSLIDE is right for you? The BEDSLIDE is the best truck bed accessory to help access tools and equipment.

Sunday, April 28, 2013

2014 F-150 SVT Raptor Special Edition

2014 F-150 SVT Raptor Special Edition


 
Ford announces the 2014 F-150 SVT Raptor Special Edition, which adds unique new touches to the high-performing off-road pickup truck - including a unique new exterior color, Ruby Red Metallic, upgraded interior and custom exterior graphics.

Friday, April 26, 2013

Nice White Ford Supercab With Knapheide Service Body, Crane and Liftgate


Here's a nice white single rear wheel super cab Ford with a Knapheide Service Body, a Tommy Gate liftgate, a Stellar Industries EC2000 pedestal crane with 2,000 lb capacity with manual outrigger, and LED lighting. 

It also sports a ladder rack on the streetside, a curbside vice bracket and spray-in bed liner protection. 

Notice how the liftgate is painted white to match the cab and the body, the crane and ladder rack.

Built by California Work Trucks in Union City, CA. http://www.calworktrucks.com/. Find out more about their liftgates at http://www.calworktrucks.com/productofferings/liftgates.html. Find out more about their cranes at http://www.calworktrucks.com/productofferings/cranes.html

Wednesday, April 24, 2013

Easy Retrieval With Slide-Down Ladder Rack

Ford E-Series

Slide-Down Ladder Rack easily lowers ladders “within arms reach.”

•Actuator handle pivots the ladder to the side of the van for safe, efficient operation.

•Zinc plated and powder coated for maximum outdoor protection.

•All ladder contact areas are protected with vinyl covered stops and anti-skid strips.

•Includes padlock feature for security.

•Adjustable to fit different extension ladders.




Monday, April 22, 2013

Ford Superduty With Harbor 14 Ft WorkMaster Body





Here's a nice Harbor 14 FT WorkMaster on a HD SuperDuty Ford Dually. This body was upfitted with a nice roof rack and a rear access ladder. Check out the conduit doors for placement of the extra long “stuff.” 

Access to the sky-high roof level is accessible by a rear mounted ladder on the driver’s side. Also, the pipe can be stored and retrieved through the small access door on upper right side. Also note the beefy step bumper.The Harbor WorkMaster is a Service Body with a roof and additional useful
features. It is available in a 10' (10' 4") for the single rear wheel cutaway chassis and comes with straight sides. In the dual rear wheel models, it is available in a 10', 12' and 14' models and can be mounted on cutaway chassis or on conventional chassis cabs. The Harbor WorkMaster is a perfect plumbers or HVAC truck, but is also useful in any number of different professions such as remodeling, mobile mechanic, locksmith, and other service industry uses to name a few. If you could
use a truck that has storage for tools and parts and want a space that you can stand up in that is enclosed to do work in or keep larger items out of the weather and public view, the WorkMaster is your truck.


Here are some standard features on the Harbor WorkMaster:

1) Walk-in Full Height Enclosure with 74" Interior Clear Height
2)  Full-length Interior shelves on both sides giving you two shelves on both sides to store items
3)  Interior Ladder Rack keeps it out of sight. Rear Grab Handles. Interior Dome Lamp (Florescent upgrade package available)
4)  Rear Access Panel that is flush with the first shelf to handle occasional longer cargo
5)  Master Lock System is standard
6) 49" Floor on Single Rear and 58" Floor on Dually models
7) 12" wide Step Bumper
8)  Full height Rear Barn Doors
9)  45ยบ Aerodynamic Front Roof Edge and Tapered Sides on Dual Rear Bodies


Visit our website at www.htbi.net  or call Harbor at 800-433-9452.

Tuesday, April 16, 2013

Ford Transit Van - Detroit Auto Show


A first look at the Ford Transit van at the 2013 North American International Auto Show in Detroit. This van is a cargo van that is making its North American debut after being sold in Europe for a while. Built with three engine choices, it competes directly with the Chevrolet Express and the Dodge Sprinter.

Sunday, April 14, 2013

Low Profile Harbor Service Body with Lots of Features and Great Visibility!





Harbor Low Profile Service Body












Here is one that you do not see too often,  Harbor Truck Bodies built this one for a water district.  It is a bit unique in that it is a low profile service body (34") with standard Stainless Steel open top lids and it has a Tommygate liftgate. In addition to this combination, there are a number of additions that are quite useful and effective.


There is a light strip at the top of the cab for working in harm's way, a receiver hitch, a non-forklift loadable rack with a strobe light and two outdoor lamps for night work. The rack also has a compartment made of partially expanded metal. Notice also the HD tie downs in the floor of the bed area and unique tie down anchors on the top of the body. All that beauty is mounted on the new Ford Super Cab single rear wheel chassis.


This whole combination of features and especially the low profile service body looks nice and clean, but has so much more visibility.


Find out more at 800-433-9452 and visit Harbor's website at http://www.htbi.net/.

Friday, April 12, 2013

Ford Superduty With an EZ Dumper and Powered by the Westport Wing System

Seen at the 2013 Work Truck Show




 Here's a nice looking Ford Superduty outfitted with a n EZ Dumper at the 2013 Work Truck Show. 
Its powered by the Westport Wing System.


The Westport WiNG Power System creates a bi-fuel truck capable of running on two fuels: compressed natural gas (CNG) first, then if empty, gasoline. It allows the owner to use a clean, domestic, low-cost energy source as their primary fuel and to have the security of gasoline as a
back-up fuel. The Westport WiNG Power System is ordered and serviced atauthorized Ford dealer/distributors. It is installed at a Westportfacility adjacent to the Ford assembly plant and shipped to your dealerusing the normal Ford Transportation System.

Find out more about The Westport Wing Power System at:





Dump Inserts

For more than 30 years, EZ Dumper has designed and manufactured well-built, durable quality products that have helped people save time, reduce costs, and overall improve their efficiency and performance on the jobsite. We are committed to our core values. From the President of our company to our dedicated team on the factory floor, we stand behind our products and our promise to you to provide exceptional quality, innovation and customer service.

 Inserts:  

    8 Foot Dump InsertEZ0012T

    6 Foot Short Bed InsertEZ0012TSB

    Stainless Steel InsertEZ0012TSS

    Aluminum InsertEZ001AT

    Utility Body Insert (Custom)EZU0012T


 Find out more at:
http://ez-dumper.com/

Wednesday, April 10, 2013

Ford Superduty With The Pup Loader Powered by the Westport Wing System


Seen at the 2013 Work Truck Show in Indianapolis:


 The cutting-edge leader in compressed natural gas engine technology now brings its power and efficiency to light-duty trucks—introducing the Westport WiNG™ Power System.


The Westport WiNG Power System creates a bi-fuel truck capable of running on two fuels: compressed natural gas (CNG) first, then if empty, gasoline. It allows the owner to use a clean, domestic, low-cost energy source as their primary fuel and to have the security of gasoline as a back-up fuel. The Westport WiNG Power System is ordered and serviced at authorized Ford dealer/distributors. It is installed at a Westport facility adjacent to the Ford assembly plant and shipped to your dealer using the normal Ford Transportation System.


Find out more about The Westport Wing Power System at:

http://www.wingpowersystem.com/








The Pup


Standard Features:

    6 Cubic Yard Body

    Packs a Ton – Fits on One Ton Trucks

    15-18 Second Cycle Time

    Loads from both sides

    Totally enclosed hopper keeps trash contained

    Full load eject, no body tipping

Options:

    Cart or barrel dumper, left or right side

    Optional Work Lights

    European Style Cart dumper

    Top-Latching self-latching hydraulic tailgate

    Strobe Light

    Rotating Beacon


Find out more about the Wayne Pup at:

http://www.wayneusa.com/pup.html

Monday, April 8, 2013

ProTech Aluminum Flatbed/Contractor Style Truck Bed At The NTEA Work Truck Show





Eric with ProTech Industries shows off a beautiful aluminum flatbed that they are famous for, along with a backpack, sometimes called an I-Pack in front of the flatbed. He then shows off the upper and lower tool boxes, the custom headboard, and some of the special construction features.


When you need a truck bed to look as good at it can work, check out ProTech at http://www.protech.net.

Saturday, April 6, 2013

Ready for the Heavy Loads - Harbor 12 Foot Stakebed With a 1600 Pound Tommy Gate!




This Ford Superduty has a Harbor 12 Foot Stakebed with a 1600 pound Tommy Gate Lift Gate. This is a great way to lift heavy cargo into the stakebed. A great combination ready for the heavy loads!

To find out more, you may call Harbor Truck Bodies at
800-433-9452. Also find us at http://htbi.net/



Thursday, April 4, 2013

SimpleCo For the Ford Transit Connect




simpleco - powered by Sortimo

 

 simpleco - the simple and economical vehicle equipment specifically for vans

Tuesday, April 2, 2013

Ford Superduty With a Truckcraft TC-503 Storm Alum Landscaper Body


This TruckCraft TC-503 Landscaper Body was on display at the 2013 Work Truck Show in Indianapolis




TruckCraft has combined innovation, durability, and experience to provide high quality products to professionals in the landscaping, construction, maintenance, utilities and municipalities industries. Our products are engineered and manufactured to exacting standards so you can have complete confidence in your choice of TruckCraft tools to accomplish your job.

This body has the Storm Tailgate and Perforated Door Option